Drivers seat airbag swap alfa 156
I changed the material on my drivers seat.
In order to do that I had to disconnect the airbag, while the battery was OFF.
When everything was done, I get the Airbag light on..
I have tried to measure the resistance on the wires that lead from the airbag, measured it on the connector under the seat. It seemed to bea bit low, something like 0.5
I then tried to connect another airbag, I have another one from another seat..
It still gave the same values, and the airbag light is still on.
I can confirm that there is no problem in the connections...
Does anyone know does this need a reset with the fault readeer? It can not be solved without it?
I also tried leaving the battery off for 45 mins, no luck
Please let me know
Last edited by salej60; 07-12-14 at 15:39.
Reason: typing error