156 Veloce 2.0 TS shock absorbers
I bought a set of Koni STR's for my 156 Veloce 2.0 TS and found the rears to be 25 mm longer than the originals. This measurement is based on the dampers' exposed ram length from base to top mounting point. This means that the static load will therefore, be different as the spring compression will be less.
Some of the parts specialists have apparently supplied these STR's (some also fitted them) so what is wrong with my set? My Veloce (that is fitted with Eibachs) now looks at the same height as a Lusso !????
Recommendations and solutions please !