DB9 Top Gear Track
AO Silver Member
Join Date: Jan 2007
Location: United Kingdom
County: East Sussex
Not having a press I took my uprights to a local garage to have the wheel bearings replaced, not much to removing the shaft from the hub.
You'll need a bl00dy long bar and a 36mm socket to get the nut undone. Before you start anything though make sure your socket will go over the nut, there's very little clearance in the recess it sits in, had to take mine down with a grinding wheel to get it on.
If you have a space saver wheel put that on the car and undo the nut with the car on the floor, it's the best way to hold the wheel while undoing the nut.
Loose - not close, compact, or tight in structure or arrangement
Lose - to part with or come to be without, as through theft, accident, negligence, etc.