age is only a number
AO Gold Member
Join Date: Aug 2004
The inner cover is held on my two screws (IIRC) plus plenty of clips - it is quite firmly attached so you have to pull quite strongly, and its not uncommon for some of them to beak or remain stuck in the tailgate.
Once its off, the rear wiper motor is held on by three bolts on the inside, but of course also held on by the wiper arm - or more accurately by the nut that holds the wiper arm on.
The pipe for the rear washer should be clipped into the shroud around the wiper motor shaft, but it often gets dislodged...
AROC Vice-Chairman and Lancashire Section Secretary
Alfa organ donor to the gentry......