Join Date: Dec 2006
Location: Glorious Sunny Whitby
Re: How to change Selespeed fluid?
My fluid got contaminated so I pulled the return pipe off the reservoir and stuffed it in a pop bottle (and stuffed a rag up the tank tube). I then connected the pump up to 12v and ran it whilst I worked the gear selector. I kept topping the reservoir up as I went. I ran over 2ltrs through the system to flush it through but I have just checked today (when the Selespeed light came on and the car wouldn't budge!) and there is still chicken soup in the fluid. So, I can say that this was not the correct way to change the fluid!!!
There is a bleed on top of the actuator. Perhaps this is the way to go??