147 new MAF now stalling
I recently had error p1177 and p1178 fault codes which reading on here and other places pointed towards a new MAF or Lambdas.
I have just purchased a new MAF and unplugged the sensor to change it and also changed the air filter.
I have also reset the fault codes on the dashboard using a cheap fault reader.
Now the light on the dash has gone out but the car is undriveable!
It stalls at every junction feels like it's got no power then too much power.
Is this just part of the cars learning process as I unplugged the sensor? Or is the MAF faulty? Or did resetting the codes cause the problem?
I've only driven about 2 miles but I don't wanna cause any more damage if something's wrong.
Btw it's a 147 2001 2.0 t-spark with 99k miles