Okay I've got a 156 and I believe the clutch has rusted to the flywheel. I have opened the inspection covers on the bellhousing, and I can see movement when the clutch is pressed, so I believe my diagnoisis is correct, but I am open to suggestions.
So I've tried starting in 1st\reverse and driving up and down the drive with the clutch down. No Luck.
So then I've jacked up the front wheels, and gone through the gears upto 4th, where I've put some revs on, and tried braking both stabbing, and gently braking, but it's still stuck. (Although it's starting to clean the front discs abit)
Anybody any thoughts before I pull the engine and transmission out, and use a pry bar\chisel?
Will spraying WD40 through the inspection hole do any good??