Well... got the diagnostic cables this morning and the car had 9 codes. I cleared the codes and now only 3 have stayed. My "repairs" seemed to have worked
. The car still won't rev past 3500 UNLESS I clear the codes while it's running, then 2 of the codes dissapear and it revs all the way to red line but when I let the revs off the 2 codes return and the revs won't pass the 3500 mark gain.
The 2 codes are:
P0235 Boost pressure sensor
P0069 Atmospheric pressure sensor
I know the boost pressure sensor can be replaced easy enough but any advice on how to test it would be helpful.
Does anybody know what reading should show on my multimeter if this is working correctly (What colour wire do I connect the multimeter too for the live feed) ?
The other code that won't go away is:
P0115 Water sensor (Circuit Malfunction)
I changed the Thermostat sensor twice and changed the thermostat as well before having this diagnostic reading. It seems like the sensor connector from the car is faulty. Again, How do I test this with a multimeter (what colour is the live wire) ?
It feels very close to being done. All help is appreciated. Thank You.