Join Date: Dec 2010
County: Western Australia
multiscan communication issue
I have a 156 selespeed I am using fiatecuscan and can connect to the engine ecu using laptop and cable but cannot establish connection with the selespeed.
I have changed the clutch and put in a second hand gearbox which is potentially out of a 147 or similar.
Prior to topping up the selespeed with oil the car would start and was clearly in neutral.
All I have done is connected the laptop and now even though the gearbox is in neutral on the dash the car drives forward on the cranks as though it is in gear.
Should I bleed the actuator perhaps?
Is there any way of reading the clutch rod distance when the gearbox is off a different model?
How can I get it back out of gear>