Re: Selespeed info
to David C
car Alfa Romeo 147 2003 year model controller Selespeed CF208F, firmware version 0x0, date of programming is: 00 00 0000.
1. Is it normal that there is no date programming?
2. after replacing the disc clutch assemblies, the problem started (before they too were not often). constantly flashing on the indicators 1-2 -4-5, never blinking: 3-R. In the transmission path indicator stops flashing, then again repeated. In mode "city" are sometimes inserting the transfer of good, and sometimes hard-transmission strikes, in any direction: up or down.
Recently moved to "manual" mode, well, then began Phantom problem. After parking the car, inserting the key in the ignition indicators may show 5 gear can also occur any gears of 3-4.
after the warmup engine R gear insert fine, but does not include 1 or 2 gears.
long waiting then she did turn -1 gear. Flashes, you can ride a long time and under braking indicator may show 5 gear although this was 2 and is 2. Yesterday at 4 gear indicator showed inserting R when driving forward, filed a beeper message saying that that insert the R gear.
That's all Phantom manifestation they may be or may not be, that is every time sitting in front of the rudder does not know what will be on the way, I get or do not get. Alfa in parking so I can not move.
I take the program AlfaDiaG 3.0.0. In the motion, the program is constantly drops connection to CF208F writes all the possible errors, and parked can work with CF208F 30 minutes, 1 hour, as needed.
In the controller CF208F there are no errors. I do not know what to do.
Tell me please what I have to do is replace the knot?
Last edited by Vaz0vod; 24-09-08 at 06:15.