Thanks for the tips! I am really a fish in German, so I'd better stay here
How can I get Smaky's opinion? Should I send private message?
I use Tutela CS oil. How big battery should I use?
Now I can select 1st, 2nd and 4th. (R,3,5, are out)
I took some measurements with Alfadiag and here's what I observed:
EV Current for Odd gears when trying to select 3rd (upwards): 1700 mA
Meanwhile, I measured the same EV current for Even gears.
So, both valves become fully open (1700 mA) if I try to put it into 3rd, instead it goes to 4th after thinking for 3 seconds.
The same happens (both valves driven by 1700 mA) if I try 5th or Reverse.
A normal transmission usually takes 300-800 mA switching current for about 0.5 s, am I right?
I don't receive Fault Codes...
But I tried to run EOL Calibration and it failed with error 0x2.
I checked the Gearbox AutoCalibration Sensor with the following result:
"Error Selecting 5a-Rm"
Do you have any idea what to do? Is it an ECU problem or battery? Should I change another ElectroValve?
Thanks for the help!