Have an 02 plate Selespeed which has failed just like some of the other cars have here too; no 1st, 3rd,4th, 5th or Reverse. Only gear engaging is 2nd!
Since the issue occured the ecu's been reset, and now the whole actuator has been swapped out with a working one, again the problem came back!
Does anyone have any other suggestions?? I'm running out of ideas
was the pump replaced?
if there is not hydraulic pressure then no further gear selection is possible.
get the operation of the pump & its operating pressure checked [ 45 to 55 bar is the range ]
if the car is left over night [ or for an hour or so ] & you then open the drivers door it should be possibel to hear the pump running for approx 7 second sto build/prime up the systems pressure.
if not buzz, its possible the pumps brashes are worn out, i recently replaced brushes of a pump, saved a good few quid.