On my 20v I am using Bilstein B4, original GTA springs, original GTA front anti-roll bar and Eibach rear anti-roll bar on the softer of the two settings. I have GTA teledials on it with 225/45/17 tyres. This is a road only car with family use etc so I haven't gone as hardcore on this one as I did on my 10v. I want to fit a Quaife LSD and then I will be done with modifications for it. It has a hybrid turbo and remap so not short on power, 220-230bhp. I had KW V2 on a previous Alfa (156 2.5 V6) and I was happy with them, probably a bit better than the V1s I had on the JTD. It would be nice to have had a little more adjustment on the JTD as I didn't think the springs or damping rates were optimum for the ride height I had it set at. It was more comfortable set lower, but then it was too low for the bad roads around here. I think longer and softer springs would have been better, then I could have wound the adjusters down a little bit and had more spring travel and a softer ride for the same static ride-height.
How low do you want to go?
- UK's leading independent Alfa Romeo specialist with branches in Bedfordshire, Cumbria & Dorset
Wizard Exhaust systems available here
Tel: 01768 879 171
Last edited by Pud237; 18-03-14 at 19:58.