AO Platinum Member
Join Date: Aug 2003
Location: London, England
Re: Tyre Wear on the GT
First I have to say that the suspension geometry data I have was kindly provided by Peter K and is dated May 2004.
If you have a lot more camber on the left side of the car it would point to the front & rear subframes moving over to that side, which would also reduce the camber on the other side (your camber on the right is slightly low).
Is it still running the standard springs or has it been lowered?
Has there been any work on the front of the car that needed the subframe lowering, ie anti-roll bar, gearbox, clutch, steering rack?
Audi TT 3.2v6 DSG
xAlfa 156 Selespeed sp3 + Brembo conversion
Fiat Cinquecento 899cc