Join Date: Apr 2013
Location: Brisbane Australia
Alex, Been using AlfaOBD, AlfaDIag AND latest Multiecuscan.
Are you SURE your looking at the ME3.1 Selespeed and not the ME7.3.1 Selespeed?
ME7.3.1 Does have the reset, where ME3.1 does not.
Just received a message from a learned chap on a different forum, looks like I owe my eyes an apology, I'm not quite as blind as I thought I was :-
The 3.1 is the only one you can do this on,
Disconnect the battery terminals - first for a minimum of 45 minutes and link the 2 wires up,
Reconnect the battery terminals + first,
Insert the key into the ignition and turn it to MAR for 90 seconds,
Turn the key to OFF for 90 seconds,
Start the engine without pressing any pedals and allow it to idle for a minimum of 5 minutes ensuring it gets up to 90'C,
Drive the car for a minimum of 45 minutes,
Done. - Smaky