starting problems with 147 jtd..
I have starting problems with my jtd. The engine turns over fine, but no fire up. Firstly i had a noise which sounded like the alternator belt, i now know that it was the high pressure pump failing which has been changed for another one, i have cleaned out the rail to the injectors for any swarf, bled the diesel through and it still wont fire up, i have no codes and the engine management light goes out as it should, i do get code p0191 and the engine light when being towed for a short distance this is diesel pressure control invalid signal. My local garage thinks it could be that the ecu has immobilized itself. I have the free multiecuscan to diagnose but can not access the can bus to check and the garage doesnt either. Is their a way to conferm it is the ecu immobilizer before i purchase the expencive software, this car seems to be eating money. Any help would be most welcome. Ian