AO Platinum Member
Join Date: Aug 2003
Location: London, England
Re: 2001 selespeed no gears
ok, that is probably the problem.
The pump should run for a few seconds to get the system up to pressure (50Bar...!), it will then stop and only run when the pressure needs topping up.
The pump is located in the LHS wheel arch and you can see it when the black plastic cover over the Selespeed fluid tank is removed.
There is also a relay for the pump. Which relay it is may be a bit random, but it is one of the big 50A relays in front of the battery.
There is a 2-way connector between the relay and the pump which you can see whey the cover mentioned earlier is removed.
Audi TT 3.2v6 DSG
xAlfa 156 Selespeed sp3 + Brembo conversion
Fiat Cinquecento 899cc