Brake Fluid change
> Millers 300+
Join Date: Oct 2013
Location: United Kingdom
HELP!!! 147 Driver sill has gone! anyone no a welder??
Ok........ MOT time coming up, doing checks today and what was a small hole on drivers sill has become around 1.2m nightmare!
So normally id say goodbye to my car, but.... this is my 147, that I do not want to say good bye too!
its a fantastic car, 2.0 lusso selespeed. fully loaded with bose/ leather heated / etc.
lots of mods have been put on the car and lots more to go on.
So I no whats needed for this job, it will cost etc
maybe cutting the whole section out and replacing with a sill cut out off another 147 is my only option, I expect that, my issue here is finding some who can do it, and a price.
im at harlow Essex, if the job can be done, I can deliver car up to 200 miles away.
The seam rail that runs under the drivers side and the floor is fine, passenger sill very good.
pics show where root starts, at the rear. Under that plastic cover the sill is good. hole is about 1.2m long ends about 10in from front of car.
its a job i need doing by beginning of feb.
any helpful advise on this please!!!