This is what I have so far....
Injectors 0 280 156 021
MAF position after turbo, 23 cm from throttle body (pictures to be sent later)
One pipe running from cam-cover through oil catch-can then on turbo inlet, nothing unmetered.
Lambda probes are located between 12-18cm after turbo outlet (I have wired one lambda to both inputs of the ECU so it sees the same readings, so there is no bank confusion) Wide band is located 60-70 cm turbo outlet, for data logging.
I would like to run 15psi of boost, waste gate is set at around 8psi any more is controlled via AEM tru boost controller, CR reduced to around 9:1
I'm guessing from previous messages it's okay for me to connect the variator.
What is the best way to send the data file?