Selespeed dropping out of reverse..
So after several years of trouble-free selespeed driving, last night when putting it into reverse it will repeatedly stay there a couple of seconds and then drop into neutral. Everything else seems fine.
Oil level is OK and I just checked with FES and there are no errors , the measurements were:
Battery voltage 12.2 / 14v (is 12.2 too low??)
Hydraulic pressure 39Bar (is that OK?)
Clutch engaged position 28.266mm
I'm not sure where to start looking - any pointers?
It's a '05 GT with 65000 miles btw.