Connecting Multiecuscan to Climate Control
156 2.5 V6
I am using a VAG interface which has been modified to connect to the air bag from the old AlfaDiag days. I believe this is similar to the "RareBear" cable. When I try to connect to the Harrison Climate Control module with Multiecuscan the software suggest that pin 9 should be connected to the K line. I have tried a jumper joining pin 9 to pin 1 but still no connection (although a scan shows that it knows the module is there). Can anyone advise whether or not I should cut the previous modification from pin 3 in order for pin 9 to work?
I need to examine the HCC module to try and establish why the actuator on the heater that controls the hot/cold flap has stopped working. I have been forced to remove the actuator so that the flap stays on cold to prevent the occupants of the car becoming desiccated corpses on sunny summer days. TG for the sun roof!