147 clutch pipe o-rings
One of the long list of things i need to do but fairly fundamental to the operation of the car.
the bleed nipple on top of the clutch slave cylinder has been weeping for what looks like a while, I have pulled out the clutch hose and there are two small o-rings that seal and allow for the system to be bled correctly.
However, one of the o-rings has a nick in it causing it to leak. The pipe itself is fine.
My question is, does anyone know if any replacement orings are available, or does anyone know the size of the o-rings.
Maybe if someone has a pipe removed from the car they could measure the inner diameter of the pocket on the pipe which the o-ring fits in to(from memory looks about 4mm), and also the diameter of the o-ring itself (about 1.2mm).