AO Platinum Member
Join Date: Aug 2003
Location: London, England
It depends how extreme the noise is.
If someone has put the wrong fluid in the system and the pump is failing, then you need a new one.
It is located under the Selespeed fluid reservoir in the left front wing.
If you remove the black plastic cover that the Selespeed reservoir pokes through, you can see the plate that the pump is fixed to the under side of.
You will also see the high & low pressure pipes on the end of it.
If you get to changing it, be careful when undoing the high pressure connection in case there is any residual pressure in the system (it runs at 50-Bar).
When you get your cable, you will be able to connect to the Selespeed ECU and get a better idea of what is actually going on.
Audi TT 3.2v6 DSG
xAlfa 156 Selespeed sp3 + Brembo conversion
Fiat Cinquecento 899cc