Originally Posted by David C
Hi Vince, what settings did they manage to set everything to?
Hi David, these are the figures (where * is used to represent degrees)
Front Caster Left Set to 3*54'
Front Caster Right Set to 3*39'
Tol is 3*25' to 4*25'
Front Camber Left Set to -0*50'
Front Camber Right Set to -0*22'
Tol is -1*01' to -0*21'
Front Toe Left Set to -0.9*
Front Toe Right Set to -0.9*
Tol is -1.6* to -0.5*
Total toe Set to -1.9*
Tol is -3.1* to -1.1*
Rear Camber Left Set to -1*46'
Rear Camber Right Set to -1*22'
Tol is -1*28' to -0*48'
Rear Toe Left Set to 1.9*
Rear Toe Right Set to 1.9*
Tol is 1.0* to 2.1*
Total Toe Set to 3.7*
Tol is 2.0* to 4.2*
Front Ride Height was 64mm both sides Tol is 56mm to 70mm
Rear Ride Height was 46mm both sides Tol is 39mm to 53mm
Track Width difference was 14mm
Wheel Base difference was 1mm
I haven't checked to see how these relate to 'official' tolerances.
What do you reckon?