Can anyone help please........
Yesterday my 156 GTA went in to get the hazard warning light button fixed.
Since then the automatic climate control seems to have gone haywire
On the "lo" setting, it is fine, blasts cold air out of the facial vents.....but then turn the dial up to 16 (the next lowest one) and the fanspeed goes to 1, and it comes out of the windscreen vents. Problem is, is comes out very warm. If I turn the dials anywhere between 16 and 33 there seems to be no change at all in the temp of the air coming out. Also if I set it to "hi" the same thing is happening (ie fanspeed 1, windscreen vernt) I thought on high the fan blasted out hot air??
Its as if the temp sensor (located just above the hazard switch) is no longer working.
Can anyone with a 156 new shape or the one with the digi heater controls please have a play, adjust the temp from 16 to 33 and see if the fanspeed or direction changes, and let me know (also, what are the settings when you put it on "hi" or front screen demist)
Im off to France tomorrow and would like it working!!