I want to get advise from you
I have 156 2003 SS . And I have one problem with airbag.
I had a problem with used of pasenger's airbag - and now I replaced it .
I connect alfadiag to clear fault codes - but control lamp - is switch on. Earlier i had 4 fault codes - in system - but after that I reset codes - i have only 1 code. 3 codes with passenger's airbag were cleared.
Now i have this problem- Recieved via alfadiag:
fault code №21: -
Failed component code: Driver 1st stage head curtain airbag front
error code status: intermittent fault present
error type: value too high
static image of lifetime timer in snapshot: 11833200 minutes
Description via snapshot:
Real Time Status One
Fault Light, System Power Supply
System Fault Light: Light On
Battery Voltage Monitored Every 100 ms: Battery Voltage Ok
Type of Cabling Set Up: Open Switch (Driver Side Only)
Battery Voltage >16 Volts for Time>10 seconds: Battery Voltage Ok
Inhibition Switch Status Passengers Loading: Inhibition Not Requested
Front Passenger 1 Presence Status: Passenger Presence Not Found At Sensor 1
Front Passenger 2 Presence Status: Passenger Presence Not Found At Sensor 2
Front Passenger 3 Presence Status: Passenger Presence Not Found At Sensor 3
Inhibition Light Passengers Loading OFF/ON: Light Off
Detecting Baby Seat: Baby Seat Not Detected
Baby Seat Position: Unknown
Intervention Counters For Pretensioner And Side Airbags
Pretensioner Intervention Counter (in all max. 3 Volts): 1st interv.
Intervention Side Bags (Right and Left)(in all max. 3 Volts): Zero interventions
There is a pics :http://s58.radikal.ru/i160/1206/7a/7b11a46c7f00.jpg
Can you give me advice? Where is this problem situate? ANd what is the airbag?
P<S, squib, driver airbag, passenger airbag are working