AO Gold Member
Join Date: Jun 2007
Location: United Kingdom
On the facelift airbags, there is a clip that you have to remove first - kind of like a tag on the connector. Pull that out and then pull the connector out. It will be fairly tight anyway though.
Make sure you put that clip back in, otherwise you will get resistance errors and an illuminated airbag light.
Pre-facelift don't have this clip, but are a tighter fit and require a really good tug to remove.
If you are fitting a facelift wheel and airbag to a pre-facelift car, you will need the facelift clockspring too - and don't forget that clip.
Last edited by filipharvey; 01-06-12 at 10:39.