negantem non est
AO Silver Member
Join Date: Jun 2011
Don't panic, it is a none interlaceing engine. You don't bend any valves it just breaks the cam rockers, one per valve. I've just paid about £16 for a rocker on a 2.4 jtdm, rocker gasget was about £30, a cam belt kit is approx £160 ish and water pumps are around £65-£80, may as well change now. Injectors are not to bad to remove, but cam be a right pain in the arse if stuck. You need to make sure you find all the needle rollers from the broken rockers, 15 in each, as they break across the bearing.
" full works
60mm Core Full size RS500 FMIC
AEM W/M Injection
Koni struts / Novitec springs
Grooved & Dimpled discs and pads
19" Prodrive wheels, Michelin Pilot Super Sport
Halo's HID's & LED's
Hub dyno'd at well over 500lbft
at the wheels !
and that's limited.
Thats over 750 Nm for you figure fiddlers