Yes I did clean the EGR, the guide is very informative and the task is easy - don't drop the gaskets down the back of the engine! You may also check the MAP sensor, it is fixed to the inlet manifold using a single torque screw, it's located just along from the EGR.
I got the tubing from a local supplier, but those off eBay are just as good. They need to be a tight fit, I made the mistake of using 5mm on the smaller connectors when it should have been 3mm. Mind your hands when fitting, if you slip it can hurt!
Brilliant Blue 156 GTA SportWagon | Q2 | KW V1 Coil-overs | Eibach ARB | Wiecher Strut Bar | Wizard Cat-Back
2009 Fiat Panda 100 HP Stealth Edition