AO Platinum Member
Join Date: Aug 2003
Location: London, England
Re: selespeed problem
If the software update he installed was the "4407 Campaign", you will not want to remove that (if you do you will get stalling problems when the engine is cold).
Reading your post again, I think your issue may be because you are suddenly appying the throttle while the gearbox is in the middle of an auto-downchange to 1st gear. While it is performing the change the throttle pedal is switched off, so when it is turned back on ifyou are in 1st gear with a lot of throttle it will take off quicker than you were expecting.
When in 1st gear or moving slowly in 2ng gear, only increase the throttle once you feal that throttle control has been switched back on again.
(it is harder to explain than it is to actually do it!!)
Audi TT 3.2v6 DSG
xAlfa 156 Selespeed sp3 + Brembo conversion
Fiat Cinquecento 899cc