DB9 Top Gear Track
AO Silver Member
Join Date: Jan 2007
Location: United Kingdom
County: East Sussex
Can anyone clarify how I remove the bush and what parts do I lube?
Do I physically remove the bush from the wishbone and lube it with Lithium grease all over?
Good question, to which I'd like the definitive answer too. Some say inject into the bush, others just grease the bolt, others it would seem remove the bush lubricate all over and replace. I still
don't know whether the wishbone is supposed to rotate around the bolt or the bush.
Last time I did mine I had the nut/bolt properly tightened, and when moved by hand rotated round the bolt.... is this what others find?
To remove the bush (if you haven't got access to a press) place a large socket over the open end of the bush, pass a bolt through the socket and bush, put a nut on the other end and start tightening, this will pull the bush out.
All the best
Loose - not close, compact, or tight in structure or arrangement
Lose - to part with or come to be without, as through theft, accident, negligence, etc.