Alfa 156 ts issue
Hi all just bought a 156 2.0 selespeed last night.
The car was very cheap so couldn't turn it down but it does have a slight issue
when you drive/rev the car it wont go past 3-4k if you floor it but will if you slowly rev it. I have disconnected the maf and it does clear the problem. Before i go and spend £100 on a maf is there any other things that could cause the issue. I have looked at the pipe after the maf and it looks like its been repaired before as i can see glue in the slots on the flex and also the wiring to the plug on the maf had some tape around it, I have removed the tape and checked the wiring it has been joined about 7" from the plug but connections look ok.
Any help from you guys would be appreciated.