Alfa 156 2.5 V6 MAF Sourcing
I know the MAF has featured highly on the forum and have read many of the posts, so I am certain I am not asking about something that has already been posted. Further to flat spot and hesitation issues, I isolated the problem to the MAF by unplugging it, to which the car runs alot better.
It was suggested that I give it a clean as per instructions on Alfa156.net, which I followed to the word. The downside was upon trying to remove the security screws, one was so badly rusted it snapped. This has ofcourse resulted in the Sensor only being held in by 1 screw.
As it happens despite a good clean and check of all piping, the flat spot/hesitation is still evident.
The post on the Forum regarding using a sensor 0 281 002 180 from a Vectra is the route I am going to head down, however I will also need a need a MAF body.
Can anyone suggest where I can get one of these without the sensor or if something will fit from another car.