Selespeed won't select Neutral or Reverse?
I hope someone can suggest a simple explaination for this...156 selespeed. Car starts okay no faults on dashboard. Can select 1&2 can move back and forwards in these gear when static with foot on brake. Car drives in all gears, with CITY mode or button / gear shift. But car will not go into N on command. The "selected gear" LCD display will only show 1 for first gear. (The car will go into N when left, like standing at lights) (Will go into N if the drivers door is opened and brake pedal released.) Reverse not selectable under any variations. If gear lever is held in N position, then after five seconds the selespeed chime sounds and the red selespeed gear icon illuminates.
I have stripped down the centre console and checked the microswitches in the gear stick these seem to function correctly, I have also tested the brake switch, both switches in this function as intended, brakes lights illuminate normally. Reverse lights do not illuminate, there is no sound of any mechanical movement when N or R are selected. I have also checked the fluid levels in the selespeed and then the gear oil in the gearbox, both okay.
I look forward to your suggestions. Thanks Andrew.