147 selespeed skiping from 2th to 5th
i have a 147 selespeed from 2001 with 200 000 km. After a couple of problems, i changed the pump, the accumulator (the black ball) and the RPM sensor. The current problem is that i can no longer go from 2th to 3rd gear. Doens't matter if the car is cold or warm, whenever i try to put the 3rd on, it skips to 5th straight. but on the way down, it goes 5th --> 4th --> 3rd --> 2nd no problem. i can also go from 3rd to 4th. I tried to calibrate it with alfadiag several times, nothing changes.
The clutch rod position is around 28.55
hydraulic pressure is between 45 and 55 bar, pump and accumulator seems to work properly.
I already tried to switch the black relays around and stress the big connector, no change.
Alfa center says "change hidraulic group" for a very big bill (they say they cannot change a single sensor, they need to change the whole thing)
Does anyone have any idea about what might be the problem?