AO Silver Member
Join Date: Apr 2002
Re: Does anyone understand Alfa Electrics?
From this I can derive two things,
1; you have a DVM
2; there's a dodgy connection somewhere
Here's what I'll do.
Check the output from the revcounter, if it's 0 volt with the bulbs and connectors in place, then either the revcounter is shot or it's not getting adequate supply.
IF it reads more than 12 volts at the revcounter with everything connected, there something fishy after the revcounter.
Bad news is, I read a thread about this on another forum a while back, it WAS the revcounter being faulty. Sorry...
PS. PM me your Email address if you want a diagram of the circuit.