hi there i am ne to this forum, hopeing someone can help i own a 156 1.8 and have bought a 147 2.0 selespeed on an 03 which is gas converted and the crank is gone.
bought a second hand engine and have fitted it
Right my problem is on tickover and low revs it pulses or seems to misfire.
everything except for the block & head has been transfered from the other engine, inlet manifold complete with throttle body injectors etc, crank sensor all wiring, plugs & coils,
so i dont see what could be causing this, only wire that wasnt transfered was cam sensor but there are no faults coming up on the obd2, so cant see that its that.
i have tried the plugs and coils from my 156 just the same i have read about a ecu reset and throttle position reset and thought i would try this.
Any ideas i would be very grateful
Ps i left the selesspeed actuator in posiotion just removed both fluid pipes and large connector, gears are fine and change ok. oh and it runs the same on gas or petrol so cant see that it can be fuel supply in any way.