is havig 2 Alfa's
Join Date: Dec 2006
Location: United Kingdom
After spending another couple of hours on it I could still not connect tot he ECU with either lead or any of the software I had.
I did try pulling the relays and cleaning the terminals but nothing.
I decide to swap them about an see if that made any difference but again nothing other than one of them getting a bit hot (probably not the same connections) swapped this back and still nothing. I decided to check the terminal one more time and pulled one of the relay bases out of its holder. That's F**ked it I thought but put it back together and when I looked at the dash the neutral light had stopped flashing.
Hey ho she started up no problem other than would only select 1,2 and R. Turned off and went through the selespeed priming sequence with no difference as it would not go past 2.
I thought a trip round the block might get the oil pumping but no move past 2 until I put it in City and then all gears selected. Now works fine and no error lights or anything.
Weird, and I still can't connect tot he ECU even now it's working fine!!
Thanks for everyone's help and input.
Life would be complete if Alfa made Motorcycles as well