156 2.4 JTD 10v 150
I've had an intermittent starting problem for 2 weeks. Engine turns over but will not start.
Now the car refuses to start at all.
I took a quick look at it last night.
1, That the CODE light goes out when the key is turned to MAR.
2, Fuel cut off switch.
3, Removed relays from in front of battery and give them all a good clean.
4, Decided to see if I've got any fault codes with Fiat ECU scanner.
Will not connect.
I can connect to the airbag and ABS ECUs but have tried several time and its a no go with the engine ECU. I have, in the past, connected to the engine ECU many times.
Thats where I'm at. I'm going out to check a fuse that supplies power to the ECU. If that is OK then I'll check I've got power at the ECU. If I have then I would suspect an ECU failure.
Any thoughts are greatly appreciated.