Ah I was waiting to see those pics!
Wilber, Basically the rocker cover gasket had not been sealed, so it tore allowing oil to **** out from the top of the engine and into the spark plug wells. Smaky drained the wells and found the spark plugs to be less than hand tight in the wells, he could loosen them with his little finger. He had to drain the oil from the wells, dry the plugs out, seal the rocker cover gasket back into one piece, seal all around the top of the engine where the gasket sits. He also dried out all the ht leads and actually found one of them to be broken, which he kindly replaced.
Edit: On that first pic on the large spark plug well, you can see the part of the gasket that tore, thats where it was sitting when we took the cover off