Selespeed software upgrade
Sent my car for the Selespeed actuator seal replacement and had the Selespeed software upgraded last week. I noticed the difference:-
a) everytime when driver's door is opened, the pump will prime up the pressure. (not after 10 opening without engine started)
b) everytime when ignition is turned on, the pump pressure up again.
same as above, but if the car is stopped, and restart within <2 hours, (a) & (b) won't happen. If it is left for 3-4 hours, then only (a) happen.
I think the new software will first detect the pressure before instructing the pump to pressure up the actuator, regardless if door is being open or ignition is turned on.
Anyone has the same experience?