AO Gold Member
Join Date: May 2008
Location: United Kingdom
County: Perth and Kinross
Ok... Just has this on AlfaDiag, and can report the following:
1 Engine ECU fault - P0335 RPM sensor (more on this later)
Clutch rod is at 29.8mm, but didn't have time to adjust it
No Sele faults were present, until I let the car get right up to temperature, when a P0725 Engine Speed No Signal fault appeared, although it didn't appear on the engine fault list.
So, I think the crank sensor is on its way out (as the fault has been reported by both ECUs...or it could be a dirty connection). The accumulator's also a bit worn by the looks of things - it's priming every 2 changes and losing about 1/10th of a bar every 5 seconds or so.
A new sensor and accumulator should improve matters...and that clutch rod length shortened by 1.5mm or so.
I also did a re-cal...and await the verdict!
Last edited by iainfm; 24-08-10 at 14:00.