AO Platinum Member
Join Date: Feb 2002
Location: The land that Time forgot
Re: Boot lid badge
The cover part is available separately but you still have to take the rest off to fit it (and it's only a fiver cheaper than the whole thing anyway). It's a bit of a barst' to fit unless you have 8" long multi-jointed fingers, so get the full monty.
The bolts holding the assembly on are shear bolts - the tops snap off when they're tight enough, so there's no way to unscrew them. You have to tap them with a drill and try to gouge a slot in them for a screwdriver. It's a bit fiddly but they're fairly soft.
A garage would do it in half an hour or so, I'd guess.
No bullets for Chaingun..