Banned for not
following the site
Join Date: Feb 2008
Location: United Kingdom
You need CS Speed fluid, £10/Litre, the system requires 600ml from empty so 1 bottle is enough, it will self bleed on the first priming cycle and the easiest way to change the pump is through the l/h wheelarch,
Jack up the car and remove the NSR wheel,
remove the 2 screws and whip off the top cover,
remove the screws and whip out the arch liner,
remove the resonator box,
remove the bolts from the pump/reservior mounting plate,
remove the 3 bolts and 2 torx screws that hold in the bumper support leg,
Disconnect the pressure and return lines from the actuator and unclip the pipework from the engine mount braket, fluid will spill,
withdraw the leg, pump and reservior through the wheel arch and then swap the pump over on the bench/floor.
Refitting is simply the opposite of removal.