Alfa 156 v6 2.5 saloon suspension advice
I am new so hello to all
I have recently bought an alfa 156 v6 2.5 LHD. It appears to have non standard DTM style suspension (lower front than rear) and I'd guess about a 35mm drop. Anyway, it's shot, noisy and bouncy.
I'm looking at replacements.
please can someone confirm
Does the suspension front and rear from the v6 sportwagon fit the v6 saloon?
Do lowering kits for the sportwagon fit the saloon? (eBay sellers don't seem to think so)
I notice part numbers are different for aftermarket kits for saloon and sportwagon but cannot definitively see there being any difference other than to vehicle weight.
I'm replacing up front the upper and lower wishbones both sides and with new bushings, replacement standard shocks and will replace the springs, once I have answers to the above.
The rear isn't noticeably bouncy- is it best to just replace all rear bushings and leave shocks alone?
Last edited by bob156v6; 11-02-10 at 14:20.