Engine, stopp and start
My Alfa is a 2003 model JTS 2,0 SW selespeed (km 105000). Sometimes the car runs the same way as it is condensation in the fuel. In one case the car stopped completely, and did not start again. I had to use a trolley to the workshop. After I took the car off the trolley at the workshop the car started again. The workshop controlled plugs + wires, fault codes P1151, 0154,2237,1670, controlled petrol pumps, and controlled the fuel pressure. They checked the tank for texture units, they checked the pump in the tank. After I picked up the car from the workshop I took the car for at trip (about 150 km). On this trip the car stopped again, after approximately 30 seconds it started again and was running normaly. Does anyone have any tips or experiences to come up with?