Airbag warning light
My airbag warning light came on Saturday. I removed the plugs under the front seats and soldered the wires together (I suspected these as the light had come on while I was adjusting the seats). The light went out briefly but then came back. I jumped up and down a few times on the driver's seat, and now the light's off again, for the last two days. Any ideas what the problem is, as I expect it will come back.
Is there a pressure switch under the driver's seat that needs to be closed to arm the airbag? Surely the control system will not need to be told that the car has someone sitting in the driver's seat before it will deploy the airbag. If there is a pressure switch under the seat, is there a way to by-pass it?