hi this is my first post.i have just finished replacing the inner cv boots on my '98 156.i started first on the left hand and replaced cv into transmission,it seemed very tight(no movement up/down or side to side)after id loosely tightened the bolts.So before i did any more i started and finished the right side,everythings ok.
Then i removed the left side again,removed cv cup,carefully replaced bearings.Still not much play,but i thought it was worth fitting again
,same thing.im just taking a coffee break while shower passes.
I will try one more time,see if i did anything wrong.Dont think ill get a response before i get it sorted,getting back to post title should it sort itself out after driving for a bit,if .....
time to put the kettle on.
Oh im not crying atall im nearly finished,what a pig of a job(used to working on my freelander different cv setup