Re: Help I Need A New Radiator
If accessability is a prob with the fixings then use a ratchet spanner, thats what i did, had no probs, but if you do, then either break the heads off the old bolts to remove fans and rad etc,remembering to get new fixings first and tap the new holes first on the new rad before fitting, normal m6 hex head bolts should be fine. Really is quite easy once you look at it properly. The lower fixings can be accessed by breaking the upper and lower clips on the ends of the mesh grill, then pull the ends outwards and using a magnetic socket remove the fixings holding the condensor etc, bye the way u need to remove the fog light surrounds to do this properly. When refitting the fog light surrounds hold the mesh grill back in place with no need to bodge it like i've read on here before. With the fans i just removed from rad first and cable tied it away from the rad, no need to remove at all just support it really as rad comes out of the bottom of the car.
Prototype Development Technician
McLaren Technology Centre