where is life going
AO Silver Member
Join Date: Sep 2003
well here you go then - alot of the world lingo website translation is ropey, so you will just have to use your head for some words (furnace hand shoes = oven gloves!!) cos it is a literal translation. so you need to refer to the orig pics too
anyway hope you all appreciate this, and pics of results are required!!
1 Open the cap and removes the black beschermkap between the two spit-roaster parts, this part has been marked on the drawing in blauw and has been confirmed with cross head propellers.
Turn the cross head propellers from both spit-roaster parts (greenness marked on the drawing). The base of these spit-roaster parts sits clicked in the bumper.
Appetite them up.
Step 2 move the wheels in the score like on the photograph has been indicated, thus you can easily at the propellers in the wheel cupboard.
In the wheel cupboard is itself a black plastic protection cap. To remove these twist you the 3 cross head propellers separately like on the photograph in the rood it has been indicated.
There is muscle strength now only necessary the cap separately, therefore beyond the bumper draw so that you can come with your hand behind the bumper.
If the cap is loose, then 3 large Torx-schroeven remove with which have been confirmed the bumper to the mudguard. (pay attention to: the rechterzijde has been confirmed with 2 Torx-schroeven and 1 klik-pal, this i.v.m. the luchtinlaat which sit now behind the bumper) turn Torx-schroef to the base of the bumper.
step 3 turn 3 Torx-schroeven to the base of the bumper loose. Turn they, they do not keep, as it happens, also the floor plate at its place (and that we do not want loosen?)
Step 4 duw the bumper forward loose, place possibly something so that these on the ground does not fall and damages.
Step 5 now the bumper hangs loose, can we the head lamp remove. These with 2 wreck and klik-pal have been confirmed. Use for this a pipe key 10.
Step 6 appetite the komplamp carefully forward and remove the 3 stekkers. These with metal clasp has been secured.
Step 7 obtains candle ends now all from the head lamp.
At the back the Unit has been confirmed the motortje of electrische the head lamp verse interview (to recognise from the text: Magneti Marelli). Turn these a kwartslag and he comes separately. The motortje sit confirmed with kogelgewrichtje to the head lamp mender, duw this carefully up obtain it separately. Just, however, it has been all made of plastic.
Step 8 leg the head lamp a furnace of 200 degrees, preheated during 4 minutes in. It lets melt definitely no longer to lie to occur.
P. A head lamp in the furnace is a strange idea, however without heating the Unit it is nearly impossible the lamp without getting kleerscheuren from each other. Do not forget that it is plastic of the Unit well file against heat, the temperature in the Unit can sometimes also very high incur.
Step 9 takes the head lamp with 2 furnace hand shoes from the furnace and duw the clips which the 2 parts hold to each other separately. Appetite then the transparent part and the black back from each other.
Step 10 the transparent cap of the Unit has been now removed, sees we the two reflectors. The hindmost reflector "makes" the lichtbundel, which leaves we therefore in peace. The first reflector has been confirmed with 1 cross head propeller, this propeller is himself behind the transparent cap of knipperlicht-deel. For this transparent cap to remove, it is necessary with a long flat propeller turner, by means of the back of the Unit the two clips separately press. Hereafter the cross head propeller can be unscrewed so that the first reflector comes separately.
Leg the transparent cap of the flashing light on a piece paperboard and sign the outlines. Knip it afterwards and leg it in the first reflectordeel at the place of the flashing light. Thus you prevent that you the reflector of the flashing light spouts black.
Step 11 makes the reflector with kitchen paper and possibly a grease remover, vet-en dust-free.
For spouting the reflector I have Motip® black, hittebestendige lake used. These lake is against temperatures to 650 °C resistant. Gebruik in
ieder geval nooit zomaar een zwarte lak, de
temperatuur in de koplampunit kan enorm oplopen.
The lake in several thin layers on the reflector spouts, thus you prevent cursors in the lake. The lake used by me has enough time of 15 up to 30 minutes, thus use time also that between introducing the lake layers.
Step 12 removes all kit of the transparent head lamp cap and of the black head lamp housing. Kit-op-kit are not attached.
All parts each other commitment (candle ends, stekkertjes, koplampversteller engine, zwarte reflector cap etc.) Introduce with kitspuit the black siliconenkit on the edge of the transparent cap.
Duw both parts in each other and spreads the kit with a wet finger (this way does not attach it your fingers). Care that the Unit is entirely impermeable after kitten.
Lekje will cause condens in the head lamp.
Siliconenkit remains elastically and is waterafstotend. Never use a kit which complete uithard as a result of which the affair can will tear later.
Please note: most of the kitten only harden from at temperatures above 5°C
Step 13 turn painter afplakband around the head lamp Unit to keep the two parts to each other. most of the kitten have enough time considerable dry necessary entirely. After 1 a 2 days can remove you the afplakband.
Put back entirely in reversed order.
The result...... GTA head lamps for prikkie?